How Do You Remove Sticky Oil from a Deep Fryer?

Rate this post

As someone who loves to cook, maintaining kitchen cleanliness must be extremely important for you. After all, a clean, organized kitchen makes cooking a fun activity. Moreover, it’s crucial in terms of health. On that note, this article aims to solve one of your cleanliness issues by answering the question, how do you remove sticky oil from a deep fryer?

What You’ll Need;

  • Grease dissolving dishwasher
  • Baking soda
  • White vinegar
  • Scrubber
  • Scraper
  • Borax
  • Container
  • Towels or soft cloth
  • Water
  • Deep fryer

Gather all these materials by the sink. When you are ready, you can begin with the process of cleaning the sticky oil left inside your deep dryer.

Step–by-Step Instructions

How Do You Remove Sticky Oil from a Deep Fryer

How do you remove sticky oil from a deep dryer? The best thing would be to clean the deep dryer before it cools enough. However, you don’t often have the time to get to washing dishes right away. When that happens, it gets quite irritating having to deal with the stubborn sticky oil residue after you are done deep frying.

In some cases, you can still scrub the sticky oil residue off without a problem. If that’s what happens to you, then that’s great and all. But sticky oil can be incredibly stubborn sometimes that scrubbing can barely do anything. Have some patience and try the following instructions to wash your deep dryer.

Remove Sticky Oil Using Grease Dissolving Dish Washer

Remove Sticky Oil Using Grease Dissolving Dish Washer
  1. Turn off the deep fryer. Let the oil cool down completely.
  2. After the oil has finally cooled down, drain it into a container if you want to reuse it. If not, make sure to dispose of it properly.
  3. Scrape the built-up residue on the sides of the fryer using a scraper. Scrape as much as you can, then discard properly.
  4. Next is to fill the fryer with water, letting it soak for a while. It is best to fill it with water as much as when you filled it with oil.
  5. It will also help to add some of that grease dissolving dish detergent you have in the water.
  6. With that mixed in, turn your fryer on and allow it to boil.
  7. Let the soap and water mix to boil for a few minutes to allow the residue stuck on the side to loosen.
  8. Please turn off the fryer and let it cool down.
  9. Once it is cooled, dump the water, then wipe the fryer’s interior using either a paper towel or a sponge. Remove as much sticky oil as you can.
  10. If there are oil residues that remain, you can moisten it using a mix of water and dish detergent in a bowl and scrub away.
  11. Rinse with clean water.

Hopefully, you can remove sticky oil from your deep fryer this way. But if there are still some that’s left, you can try cleaning it again using baking soda and white vinegar. For this method, follow the steps below:

  1. If there is still a sticky oil film, try making a paste of baking soda and white vinegar.
  2. Rub the paste you made all over the fryer’s surface where there is still residue that remains.
  3. Rub the baking soda and white vinegar paste using a soft towel or sponger. Do so in a circulator motion until you successfully removed the sticky film.
  4. It would be best as well to rub the paste not only inside but the outside of the fryer. It helps to remove any oil splatters or build up.
  5. Once you are done, rinse it again with clean water.
  6. Make sure to wash your deep fryer thoroughly and that no cleaning products remain.
  7. After this, dry the fryer using a clean, dry soft towel.
  8. It would help if you also air dry it to ensure that all other deep fryer parts are completely dry.

Pointers and Things to Keep in Mind

Pointers and Things to Keep in Mind

The steps mentioned above dramatically helps in removing sticky oil from a deep fryer. It successfully cleans even the dirtiest dryers. However, there are a few things to keep in mind in terms of the safety and efficiency of using this method.

  • Be extra careful when using chemicals to clean the fryer. Make sure to rinse it thoroughly so that no chemicals are left in your fryer that may end up transferred to your foods.
  • You shouldn’t wet any electrical components. But sometimes, you can’t avoid it. So that your fryer doesn’t break or damage, make sure it is completely dry before plugging in. It usually works fine if you just make sure the water dries.

Conclusion

How do you remove sticky oil from a deep fryer? The process is almost the same as when cleaning any dirty dishes. However, it will usually take some effort on your part. With the steps mentioned above, I hope you have an easier time cleaning your deep fryer.

See more Tips:

How to Season a Wok in the Oven – Step-by-Step ProcedureHow to Remove Mini Tarts from Pan

Leave a Comment